Skip to content
Kincaid Electrical Services, Inc. logo
Kincaid Electric electrician replacing breakers in a home electrical panel

Notes from the Lake Wales shop

Posts on dead outlets, panels, lighting, generators, and the other jobs we do in Polk County. Each one is dated.

Latest Posts

Recessed lights in a ceiling that is already finished

How recessed lights go into a finished Polk County ceiling: attic access, can versus wafer, insulation contact, spacing, and when a new circuit is required.

Read the post

The circuit for a home EV charger

What a home EV charger circuit takes in Polk County: load calculation, hardwired versus a 240-volt outlet, permit, wire run, and when the panel has to come first.

Read the post

A GFCI outlet that will not reset

Why a GFCI outlet in a Polk County house will not reset: an open line, a tripped device upstream, a wet box, a failed GFCI, and what to check before calling.

Read the post

Outlets that stopped working in one room

Why outlets go dead in a Polk County house: a tripped GFCI, a half-tripped breaker, a loose backstab, a failed receptacle, and when half the house points to a lost leg.

Read the post

Why Lights Flicker in a Polk County House

A flicker can be a tired bulb, a loose switch, or a problem at the service. How to tell which one you have before you keep living with it.

Read the post

What a Ceiling Fan Installation Costs in Polk County

The fan price and the installation price are different jobs. A fan-rated box, a brace, and a second switch are what move the number.

Read the post

How a Generator Hooks to a Polk County House

A generator cord does not go into a dryer outlet. The safe hookup is an inlet, an interlock or a transfer switch, and a panel that can take them.

Read the post

Whole-House Surge Protection for a Polk County House

A plug-in strip covers the television. A Polk County house also has an air handler, a well pump, and a range. What a panel surge device does.

Read the post

Why a Breaker Keeps Tripping in a Polk County House

A breaker that will not stay on is usually an overload, a short, or a ground fault. What the timing tells you, and when to stop resetting it.

Read the post

Signs You Need an Electrical Panel Upgrade in Polk County

Eight warning signs your electrical panel needs an upgrade in Polk County, and what a permitted 200 amp service change includes, from Kincaid Electric.

Read the post

Call the shop

Monday through Friday, 7:30 AM to 4:30 PM. Tell us the problem and we will say when we can come.

Call NowSchedule